Professional installation of Built-In appliances is available in most cases. When we deliver, our experts can disconnect your old electrical appliance and install your new Washing Machine, Washing Dryer, Built-in Single Oven, Free Standing Electric Cooker will be installed by company with Standard Connection only.
We’ll connect your appliance to the water and waste pipes, switch it on and test the machine. If you’re ordering a vented tumble dryer we’ll connect the vent hose to an existing wall duct, but we don’t offer installation services for condenser dryers as these can just be plugged into the socket.
We’ll disconnect your old appliance (regardless of fuel type), connect your new one, and give you a basic demonstration of how to use it.
Sidewalks and Driveways must be clear of snow and ice. We require that a clear path is available through your house to the area the appliance(s) will be left or installed. We do our best to prevent damage to floors, but if you have floors that might be damaged by debris carried in on carts or shoes, you will need to put down something to protect them. We can usually remove doors from their hinges, but we do not remove door moldings or other parts of your house.
A 30-amp service must be within reach of a standard 4-foot dryer cord. If the standard 3 or 4-prong outlet is not available, one may have to be installed. This requires a licensed professional, and is not part of the services provided by us. Venting your new dryer to the outside, with aluminium flexible duct, is now required by law; and plastic duct is now considered a fire hazard. We will provide you with new, metal duct, if desired, and install it.
Free-Standing Electric Cooker will be connected, slid into place, leveled, and the packaging will be removed. If you’re existing range is either built in or not removable by sliding the product out, additional charges may be required. We are not responsible for removing ranges that are built in, hard wired (connected to a junction box), or connected to any “downdraft systems” or outside venting that may require removal. This service is available at additional cost.
Your new washing machine will be set in place, levelled, and connected. The drain hose will be installed, provided it reaches your house drain. Drains must be within reach of the drain hose provided. If additional drain hose is required, it can usually be provided, at an additional charge. Most washers today will pump to a maximum of 4 to 6 feet from the floor. For higher house drains, accessory kits may be required. Hot and cold water hoses will be connected, providing the supplied hoses reach the supply connections, the old connections are not corroded, and they are easily removable. Please make sure your old washer is free of oil or debris before removal. Also, if your old washer has stopped working and has a full tub of water, it must be removed before we can move it. We are not responsible for old machines leaking oil or water, or other substances, in your home during removal. Make sure that there is a water shutoff valve accessible to installers so they may turn the water off prior to installation.
Our expert 2 man installation team will carefully unpack your product. We will connect your product safely. We’ll give you a demonstration of the controls and functions
For further information please contact us at firstname.lastname@example.org